| Speaker installation options |
|
| |
| ∫ Attaching to a wall |
| 3 Fit the speaker securely onto the screw(s) with the hole(s). | |
| You can attach all of the speakers (except subwoofer) to a wall. | Front speaker | Center speaker | |
Setup |
|
| ||
≥The wall or pillar on which the speakers are to be attached |
|
| ||
|
|
| ||
| should be capable of supporting over 10 kg per screw. Consult a | 106 mm |
| |
| qualified building contractor when attaching the speakers to a |
| ||
Simple |
| 200 mm | ||
≥When mounting the front speakers to a wall, we recommend |
| |||
| wall. Improper attachment may result in damage to the wall and |
|
| |
| speakers. |
|
|
|
| using a string (not included) to prevent it from falling. |
|
| |
| 2 Screws | 2 Cover plates | 340 mm |
|
|
|
|
| Surround speaker |
speakers | Preparation for front speakers |
|
|
|
1 Remove the speaker cable from the stand. |
|
| ||
|
|
| ||
| Release the cable | e.g. | Move the speaker | |
| In this position, the | |||
frontthe | from the groove. | speaker will likely | so that the screw is | |
|
| fall if moved to the | in this position. | |
|
|
| ||
Assembling |
|
| left or right. |
|
|
| Reattaching the speaker cable to the stand | ||
|
|
| ||
|
|
| 1 Remove the eight screws from the stand, and remove the speaker net. | |
|
|
| Screw |
|
| 2 Connect the cable (➜ page 5). |
|
|
|
2 Position the cable.
1Attach the cover plate to the front speaker.
2 | Screw | Approx.15 cm |
| ||
| Tighten securely. | Press the cable |
|
| into the groove. |
1 |
|
|
Cover plate |
| Cable |
|
|
2Drive a screw (not included) into the wall.
‰4.0 mm | ‰7.5 to 9.5 mm | 3 Attach the speaker net with the screws. |
| ∫ Fitting speaker stands (not included) | |
Wall or pillar |
| |
5.0 to 7.0 mm | (Except front speakers) | |
|
| Ensure the stands meet these conditions before purchasing them. |
|
| Note the diameter and length of the screws and the distance |
|
| between screws as shown in the diagram. |
|
| ≥The stands must be able to support over 10 kg. |
|
| ≥The stands must be stable even if the speakers are in a high position. |
|
| e.g. Center speaker |
|
| Metal screw holes |
|
| For attaching to |
|
| speaker stands |
|
| 5 mm, pitch 0.8 mm |
|
| Plate thickness plus |
RQT8606 |
| 7 mm to 10 mm |
| 60 mm | |
|
| |
|
| Speaker stand |
6 |
| (not included) |
|
|
