Panasonic SC-HT855 manual To adjust speaker level during play, Enhancing the bass sound

HT855En.book Page 31 Tuesday, March 7, 2006 2:33 PM

Enhancing the bass sound:

H.BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. The unit automatically selects the most suitable setting according to the type of playback source.

Press [-H.BASS].
	ST	SRD E.
≥[DVD-V] [DVD-VR]		HDCD
		H.BASS
H.BASS ON (factory preset),------.H.BASS OFF		W PGM
		1
≥When another source is selected
H.BASS OFF (factory preset),------.H.BASS ON

The setting you make is retained, and recalled every time you play from the same type of source.

Enhancing the surround sound effect: Surround Enhancer

Press and hold [—SRD ENH].

ST	SRD E.
Each time you press and hold the button:	HDCD
	1
SRD ENH ON,------.SRD ENH OFF
	W PGM

Adjusting the volume of each speaker: Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

Press [DVD].

1	While stopped and no on-screen display is shown
	Press and hold [—TEST] to output a test signal.
	≥To stop the test signal, press and hold [—TEST] again.
	L: Front left	C: Center	R: Front right
	RS: Right surround	LS: Left surround
	≥There is no output from SW (subwoofer) channel.
2	Press [VOLUME, r] or [s] to set the volume level
	normally used for listening.
3	Press [3] (increase) or [4] (decrease) to adjust the
	speaker level for each speaker.

≥Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

∫To adjust speaker level during play

[Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on.]

1 Press [CH SELECT] to select the speaker.		effects
L #C #R #RS #LS #SW
^-----------------------------------------------------	}
SW: Subwoofer		sound
≥You can adjust SW only if the disc includes a subwoofer
channel.
≥“SW” does not appear on the display and is not adjustable		Using
when “ÎPLII” is lit.

≥“S” appears on the display when “MOVIE”, “SPORT” or “MUSIC” is selected with Sound Field Control (➜ page 30).

In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQT8606

31