Panasonic SC-HT855 manual Preparation, Attach the speaker to the stand Base Speaker Cable

			2:33 PM
	HT855En.book Page 4 Tuesday, March 7, 2006
		STEP1 Assembling the front speakers
					The supplied stands are specially
					Panasonic SB-FS540 front speakers.
					designed for attachment to
					Use only as indicated in this setup.
Setup		Preparation
		≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Simple		≥For assembly, use a Phillips-head screwdriver.
		≥Make sure you have all the indicated components before starting assembly, setup, and connection.
		≥There is no difference between the right and left speakers and stands.
		≥For optional wall mount, refer to page 6.
		2 Front speakers	2 Stands	2 Bases	8 Screws
		(with cover plate)	(with cable)

speakers	1	For quicker threading, loosely fold the cable in half (do not	2	Tighten securely.
		Attach the stand to the base.		Secure the stand to the base.
front		1 Thread the speaker cable through the base.		Screw
		crease), pass the folded portion through the hole, and then pull
		the rest of the cable through the base.
the		Cable		Stand
Assembling
				Base
		Base		Slide the speaker
				cable into the groove.
				Screws
		2 Attach the stand to the base while gently pulling on the		Tighten securely.
		end of the speaker cable.	3 Attach the speaker to the stand.
				1 Pull out the end of the speaker cable and position it
				between the ridges.
				Ridges
		Stand
				Cable
				Stand

2 Attach the speaker to the stand.

Base Speaker

Cable

Pull gently.

	Stand
		Cover plate
		Remove before attaching the
		speaker and keep for wall-mount
RQT8606		use (➜ page 6).

4