Simple Setup
HT895≥EnFor.bookassembly,Pageuse6 | Friday,a |
|
STEP1 | Assembling the speakers | The supplied stands are specially designed for |
speakers. Use only as indicated in this setup. | ||
|
| attachment to Panasonic |
|
|
|
\Southeast\Asia,\Th iland,[the\Middle\East,\South\Africa,\Saudi\Arabia\and\Kuwait\ Front and surround speakers [Australia[and[N.Z.] Front speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥Make sure you have all the indicated components before starting assembly, setup, and connection. ≥There is no difference between the right and left speakers and stands.
≥For optional wall mount, refer to page 7.
4 Front and surround speakers | 4 Stands | 4 Bases | 16 Screws |
(with cover plate) | ≥2kstands with short cable: For front speakers | [Australia[and[N.Z.] | [Australia[and[N.Z.] |
[Australia[and[N.Z.] | ≥2kstands with long cable: For surround speakers | 2 Bases | 8 Screws |
2 Front speakers | [Australia[and[N.Z.] |
|
|
(with cover plate) | 2 Stands (with cable) |
|
|
|
|
|
Assembling the speakers
1 Attach the stand to the base.
1Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.
Cable
Base
2Attach the stand to the base while gently pulling on the end of the speaker cable.
Stand
3
4
Attach the speaker to the stand.
1 Pull out the end of | Ridges |
the speaker cable |
|
and position it |
|
between the ridges. |
|
Cable
Stand
2Attach the speaker to the stand.
| Cover plate |
Speaker | Remove before attaching |
| the speaker and keep for |
|
Stand
Secure the speaker to the stand.
Base
Cable
Pull gently.
Speaker
Stand
Screw
Tighten securely.
Ensure the speaker cable is centered in the groove.
RQT8607
6
2 Secure the stand to the base.
Screw
Tighten securely.
Stand
Base
Slide the speaker cable into the groove.
Screws
Tighten securely.
5
Connect the speaker cable.
Insert the wire fully.
_: White
`: Blue
Push!
Press the speaker cable
into the groove.