Panasonic SC-HT895 Simple Setup, Audio and video connections, Component Video Out, S-Videoout

HT895En.bookPage11Friday,April21,20064:17PM
Other video connections for mproved picture quality
COMPONENT VIDEO OUT
Television		Back of the
(not included)	Video cables	main unit
COMPONENT	(not included)	COMPONENTVIDEO OUT
VIDEO IN		Y
PB
		PB
PR
		PR VIDEO	S-VIDEO
Y		OUT	OUT

≥Using the COMPONENT VIDEO OUT terminals

The COMPONENT VIDEO OUT terminals provides a purer picture than the S-VIDEO OUT terminal. These terminals can be used for either interlaced or progressive output. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.

≥The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color.

To enjoy progressive video

≥Connect to a progressive output compatible television.

1 Set “Video Output” to “Off” (➜ page 28, “HDMI” tab).

2 Set “Video Output Mode” to “480p” or “576p”, and then follow the instructions on the menu screen (➜ page 23, Picture Menu).

S-VIDEO OUT

		Back of the
Television		main unit
(not included)		COMPONENTVIDEO OUT
S-VIDEO	S-video cable	Y
	(not included)
IN
		PB
		PR VIDEO	S-VIDEO
		OUT	OUT

≥Using the S-VIDEO OUT terminal

The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.)

Simple Setup

Audio and video connections

∫Cable TV box or video cassette recorder connection

	Cable TV box or video cassette recorder (not included)
	RF IN	Television
To your		(not included)
cable TV
service or		RF IN
television	RF OUT	AUDIO	AUDIO
antenna				Audio cable
		OUT	IN	(not included)
	RF cable
		L
	(not included)
		R		Video cable
		VIDEO OUT	VIDEO IN	(included)

Back of the main unit

		COMPONENTVIDEO OUT
			Y
L
		PB
R
TV	AUX	PR	VIDEO	S-VIDEO
AUDIO
IN			OUT	OUT

You can use the AUX terminal for the audio input when you connect another external device (e.g. video cassette recorder). Select “AUX” as the input source (SELECTOR ➜ page 14).

RQT8607

11