Panasonic SC-HT895 manual Using on-sceen menus, Picture Menu Continued, Audio Menu, Other Settings

Using on-screen menus

HT895En.bookPage24Friday,April21,20064:17PM						To make the dialogue in movies easier to
	Using on-sc een menus
	Other Settings				Items shown differ depending on the type of disc.
	∫ Picture Menu (Continued)			∫ Audio Menu
		If you have chosen “xxx§p” (progressive) or “1080i”			Dolby Pro Logic II	(➜ page 32, Enhancing the stereo sound:
		(interlace) (➜ page 23, “Video Output Mode” in Picture				Dolby Pro Logic II)
		Menu), select the method of conversion for progressive
		output to suit the type of material.				hear
		≥The setting will return to Auto or Auto1 when the disc
						[DVD-V](Dolby Digital, DTS, MPEG, 3-channel
		tray is opened, the unit is turned off or another source
						or higher, with the dialogue recorded in the
		is selected.			Dialogue Enhancer
						center channel)
		When playing PAL discs, MPEG4 or DivX video				[DivX] (Dolby Digital, 3-channel or higher, with
		contents				the dialogue recorded in the center channel)
		Auto:	Automatically detects the film and video			On ,------. Off
		Video:	content, and appropriately converts it.			To enjoy comfortable, analog-like sound
			Select when using Auto, and the content is
						[DVD-VR][DVD-V](Discs recorded with 48 kHz
			distorted.
	Transfer					only)
		Cinema: Select this if the edges of
						[WMA] [MP3] (Disc recording is other than
	Mode		the film content appear
					Sound	8 kHz, 16 kHz or 32 kHz)
			jagged or rough when Auto			[VCD] [CD]
			is selected.		Enhancement
						On ,------. Off
			However, if the video
						≥This may have no effect depending on the
			content is distorted as shown in the
						disc’s recording.
			illustration to the right, then select Auto.
						≥This does not work with MP3 on DVD-RAM
		When playing NTSC discs				or DVD-R/RW.
		Auto1: Automatically detects the film and video
			content, and appropriately converts it.
		Auto2:	In addition to Auto1, automatically detects film
			contents with different frame rates and
			appropriately converts it.
		Video:	Select when using Auto1 and Auto2, and the
			content is distorted.
		When you select “Auto” the constructing method of the
	Source	DivX contents is automatically distinguished and
		output. If the picture is distorted, select “I (Interlace)” or
	Select	“P (Progressive)” depending on which constructing
	[DivX]	method was used when the contents were recorded to
		disc.
		Auto, I (Interlace), P (Progressive)
		This works when the HDMI connection is being used
		and “Video Output” (➜ page 28, “HDMI” tab) is set to
	HD Picture	“On”.
	Enhancer	To sharpen the “720p” and “1080i” picture quality
		Off,------. 1,------.2,------.3(sharpest picture)
		^------------------------------------J
		This works when the HDMI connection is being used
		and “Video Output” (➜ page 28, “HDMI” tab) is set to
		“On”.
	HDMI Color	To select suitable picture color with your television
	Space	RGB
	(or HDMI
		YCb Cr (4:4:4)
	Colour	YCb Cr (4:2:2)
	Space)	≥If the setting above is not compatible with your
		television, it will not be displayed.

≥“RGB Range” (➜ page 28, “HDMI” tab) is available when “RGB” is selected.

RQT8607

24