COMPONENT VIDEO OUT terminal
[HT95]
COMPONENT VIDEO OUT terminal
≥The description of the component video input terminals de- pends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color.
≥After making this connection, change the black level for a better picture (➡ page 28, Video—Black Level Control).
To enjoy progressive video
S-VIDEO
OUT
S VIDEO
IN
S video cable (not included)
The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chromi- nance (C) and luminance (Y) signals before transmitting them to the television.
(Actual results depend on the television.)
Television
S-VIDEO OUT terminal
[HT95]
For better images
TV AUDIO IN
For better images
Video cable
(included)
Audio cable (not included)
VIDEO
IN
TV’s AUDIO OUT terminals
L
R
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard.
To listen to the televi- Television (not included) sion through this unit
The illustration shows SC-HT95.
Television
STEP2
Simple setup
PR
COMPONENT VIDEO OUT (480P/480I)
(see below)
These terminals can be used for either interlace or progressive out- put and provide a purer picture than the S-VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.
Television
Y Y PB
PB
PR | Video cable (not included) | PR |
|
COMPONENT | | COMPONENT |
VIDEO OUT | |
| VIDEO IN |
(480P/480I) | |
| |
1.Connect to the component video (480p) input terminals on a television compatible with this unit’s copy guard system.
2.Press [PROGRESSIVE OUT] on the front panel so the indicator lights (➡ page 12).
NOTE
This unit does not output video signals from the VIDEO OUT and S-VIDEO OUT terminals when the “PROGRESSIVE OUT” indicator is on.
Note
≥The screen may shift off center when using progressive output. Adjust the position of the screen if this occurs (➡ page 21, Video—Horizontal position).
≥Video will not be displayed correctly if you connect to a televi- sion that is incompatible with this unit’s copy guard system.
≥This unit does not output video signals from the VIDEO OUT and S-VIDEO OUT terminals when the “PROGRESSIVE OUT” indicator is on.
For your reference
All televisions manufactured by Panasonic and that have 480p input terminals are compatible. Consult the manufacturer if you have another brand of television.