STEP3 Antennas and AC power supply cord
AM loop antenna (included)
Keep loose antenna cord away from other wires and cords.
Adhesive tape
FM indoor antenna (included) Fix the other end of the antenna where reception is best.
|
| 2 |
AC power supply cord |
| 1 |
(included) |
|
|
AC IN~ | FM ANT AM ANT | |
|
| |
75 | Ω | GND LOOP EXT |
|
|
To household AC outlet
Note
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
Conserving power
The unit consumes power (for U.S.A. and Canada: approx. 0.28 W, for Latin
America and others: approx. 0.8 W) even when it is turned off with [Í]. To save power when the unit is not to be used for a long time, unplug it from the house- hold AC outlet. Remember to reset the radio stations and any other memory items before using the unit again.
For your reference
Information you enter into the unit’s memory remains intact for up to a week after the AC power supply cord is disconnected.
[For\areas\except\U.S.A.\and\Canada[
If the power plug will not fit your AC outlet
Use the power plug adaptor (included).
If it still doesn’t fit, contact an electrical parts distributor for assistance.
1
AM loop antenna
holder (included)
2
3Turn the antenna to the angle of best reception and least interference.
To attach to a wall or other surface
Screw
(included)
LOOP ANT
HOLDER
[For\areas\except\U.S.A.\and\Canada[
Before connecting the AC power supply cord
Set the voltage.
(Bottom panel)
127 V 110 V 220
VOLT ADJ
Use a
If the power supply in your area is 115 V or 120 V, please set the voltage selector as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
Simple setup
9
RQT6183