Planar PD520 Connecting External, Speakers Optional, Connecting to a Dolby, Digital Amplifier

Connect the (positive) and (negative) speaker wires to the rear-panel			Connecting External
SPEAKER-R and SPEAKER-L terminals; see Figure 3-7.Connect speakers with an			Speakers (Optional)
impedance of 4 ohms. Maintain the correct polarity. For more information, refer
to the owner’s manual for your speakers.
Twist exposed
wire strands
together.
Push tab to the
open position, and
insert the wire.
Then, close tab firmly to
secure the wire in place.	Right Speaker	Left Speaker
Figure 3-7. External Speaker Connection
If your home theater has a Dolby Digital amplifier or receiver, connect the			Connecting to a Dolby
digital audio output from the PD520 to the digital audio input of the			Digital Amplifier
amplifier/receiver as shown in Figure 3-8.The PD520 supports both coaxial
(S/PDIF) and optical (TosLink) digital audio connections.

Note	The audio output level is fixed. (The volume and mute
	controls affect only the speaker and headphone outputs.)

Digital Audio Cable,

Optical

(Sold Separately)

- or -

Digital Audio Cable,

Coaxial

(Sold Separately)

Dolby Digital

Amplifier

Figure 3-8. Digital Audio Connection

Planar PD520 Owner’s Operating Manual 21