Table
Command
Description
The following serial commands are meant to emulate buttons on the remote control. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.
Each command begins with [key followed by the
[
[
[
[
[
[
key | 0002 | ON |
| 0015 | OFF |
key | 0011 | INPUT1 |
| 0000 | INPUT2 |
| 0019 | INPUT3 |
| 0016 | INPUT4 |
| 0040 | HDMI1 |
| 0043 | HDMI2 |
| 0039 | PC |
| 0062 | AUTO |
key | 0028 | CUSTOM |
| 0001 | STANDARD |
| 0027 | CINEMA |
| 0105 | VIVID |
key | 0005 | 16:9 |
| 0009 | 4:3 |
| 0013 | LETTERBOX |
| 0017 | NATIVE |
key | 0098 | |
| 0097 | |
| 0096 | |
| 0099 | |
| 0046 | ENTER |
key | 0026 | MENU |
|
|
|
Planar PD520 Owner’s Operating Manual | 47 |