There is no audio.
The power of the main unit turns off automatically.
(When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high? If so, lower the volume.
≥Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on
again.
If the problem persists, confirm the display, turn this system off, remove the AC power supply cord and consult your dealer. Please be sure to remember the display that was indicated and inform the dealer.
Main unit displays
“F61”
≥There is a problem with the amplifier of the system.
≥Disconnect the AC power supply cord and consult the dealer.
“F70 HDMI”
≥Check HDMI connection.
≥Turn off the main unit and then switch it on again.
≥Disconnect the HDMI cable.
“F76”
≥There is a problem with the power supply.
≥Disconnect the AC power supply cord and consult the dealer.
28 RQT9922
Active Subwoofer
No power.
Ensure the AC power supply cord of the active subwoofer is connected properly.
After turning the subwoofer on, it immediately turns off.
Unplug the AC power supply cord and consult your dealer.
No sound from the subwoofer.
≥Check that the active subwoofer is turned on.
≥Check that the WIRELESS LINK indicator lights green. (> p. 19)
The WIRELESS LINK indicator lights red.
≥There is no link between the main unit and the active subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC power supply cord and then reconnect it.
≥The active subwoofer and the main unit may not be paired correctly. Try the following operation. (Wireless pairing)
1 Turn on the main unit and active subwoofer. 2 Press and hold [ID SET] on the rear of the
active subwoofer for more than 3 sec. (The WIRELESS LINK indicator will blink in red.)
3 While pressing and holding [INPUT] on remote control, press and hold [VOL i] on the main unit for more than 4 sec. (“SUBWOOFER PAIRING” will be indicated on the display.)
≥When the wireless pairing is successful, “PAIRED” will be indicated on the display for 2 sec and WIRELESS LINK indicator lights green.
4 Turn the main unit off and on.
≥Consult your dealer if the problem persists.
