Step 2 Placement

When placing the main unit in a rack or on a table

≥ Place the main unit on a flat and horizontal surface.

Supplied accessories

[HTB70]

∏ 2 Basic stands

∏ 2 30o stands

∏ 2 80o stands

∏ 2 Screws with

 

washer
Additionally required accessories (commercially available)

≥Fall prevention cord .........................................................................................................................

k 2

≥Screw eyes (to attach the fall prevention cord)................................................................................

k 2

≥Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs).

≥Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).

Attach the cord to the main unit.

ACord§

§If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).

10 RQT9763