Advanced operations
Audio format indicator | Auto gain control | |
To display the current audio format. | With this function, you can prevent sudden loud sounds. | |
Press and hold [SOUND] for more than | The output will be reduced automatically when the input | |
exceeds a certain level. | ||
4 sec. | Press and hold [INPUT SELECTOR] | |
≥ The current audio format is indicated for 5 sec. | ||
on the remote control for more than | ||
| ||
“STADIUM” indicator blinks: | 4 sec. | |
Dolby Digital is the audio format. | “STANDARD” indicator blinks: | |
| ||
“MUSIC” indicator blinks: | Auto gain control is on. | |
| ||
DTS is the audio format. | “STEREO” indicator blinks: | |
| ||
“CINEMA” indicator blinks: | Auto gain control is off. | |
(Factory preset) | ||
PCM is the audio format. |
|
Audio format is not indicated when “ ” or “BD/DVD” is selected as the source.
Changing the dual audio
Change the dual audio from main to secondary.
≥This setting will only work if the audio output setting on the connected TV or player, etc. is set to "Bitstream" and dual audio is available in the audio source.
While the setting is displayed, press [INPUT SELECTOR] on the remote control to change the setting.
≥The setting changes each time [INPUT SELECTOR] is pressed.
≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode.
≥The setting is maintained until it is changed again.
Bluetooth® communication mode
Press and hold [MUTE] for more than 4 sec.
“STANDARD” indicator blinks (A): Main (Factory preset)
You can select different modes to suit the type of connections with emphasis on connectivity or high quality audio.
≥Make sure that a Bluetooth® device is already paired with this system. (> 17)
Press [
] to select “
”.
|
| “STEREO” indicator blinks (B): | ≥ “ ” indicator will blink slowly. If the indicator lights, a | ||||
|
| Bluetooth® device is already connected with this system. | |||||
|
| Secondary | Disconnect it. (> 17) | ||||
|
|
|
|
|
|
|
|
|
| (SAP: Secondary Audio Program) | Press [ ] to display the current | ||||
| When A and B both blink: Main and secondary | mode. | |||||
|
| While the setting is displayed, press | “STANDARD” indicator blinks: | ||||
|
| [MUTE] to change the setting. | MODE1 (Factory preset) | ||||
|
|
|
|
|
| ||
| ≥ The setting changes each time [MUTE] is pressed. |
| Emphasis on connectivity | ||||
| ≥ The indicator for the selected setting blinks for 20 sec and | “STEREO” indicator blinks: | |||||
| then exits the setting mode. | ||||||
| ≥ The setting is maintained until it is changed again. | MODE2 | |||||
|
|
|
|
|
| Emphasis on audio quality | |
|
|
|
|
| While the mode is displayed, press | ||
|
|
|
|
| [ ] to select the mode. | ||
|
|
|
|
| ≥ The setting changes each time [ ] is pressed. | ||
|
|
|
|
| ≥ The indicator for the selected setting blinks for 10 sec and | ||
|
|
|
|
| then exits the setting mode. | ||
|
|
|
|
| ≥ The setting is maintained until it is changed again. | ||
20 | RQT9763 |
|
|
| |||