Specifications
Amplifier section
RMS output power: Dolby Digital mode |
|
|
Front Ch 30 W per channel (6 Ω), 1 kHz, 10% | THD | |
Subwoofer Ch |
|
|
60 W per channel (3 Ω), 100 | Hz, 10% | THD |
Total RMS Dolby Digital mode power | 120 W | |
Bluetooth® section
Bluetooth® system specification | Version 3.0 | |
Wireless equipment classification | Class 2 | |
Supported profiles |
| A2DP |
Operating frequency | 2402 MHz to 2480 MHz | |
Operation distance |
| 10 m line of sight |
General
Power supply | AC 220 V to 240 V, 50 Hz | |
Power consumption |
| 27 W |
Dimensions (W x H x D) | 460 mm x 60 mm x 280 mm | |
Mass |
| 3.2 kg |
Maximum loading weight |
| 30 kg |
Operating temperature range | 0°C to +40°C | |
Operating humidity range |
| 20% to 80% RH |
Terminals section
HDAVI Control
This unit supports “HDAVI Control 5” function
HDMI AV input |
|
Input connector | Type A (19 pin) |
HDMI AV output |
|
Output connector | Type A (19 pin) |
Digital audio input |
|
Optical digital input | Optical terminal |
Sampling frequency | 32 kHz, 44.1 kHz, 48 kHz |
| 88.2 kHz, 96 kHz (only LPCM) |
Audio format
Dolby Digital, DTS Digital Surround, LPCM
Analog audio input |
|
Audio input | Pin jack (1 system) |
USB port | For service use only |
Speaker section
Front speaker (built-in)
Type | 1 way, 1 speaker system (bass reflex) |
Speaker unit(s) |
|
Full range | 3.8 cm x 9 cm cone type x 2 |
Subwoofer | |
Type | 1 way, 2 speaker system (bass reflex) |
Speaker unit(s) |
|
Woofer | 8 cm cone type x 2 |
(no condensation) |
Power consumption in standby mode (With “BLUETOOTH STANDBY” set to “OFF”)
0.25 W (approximate)
Note:
•Specifications are subject to change without notice. Mass and dimensions are approximate.
•Total harmonic distortion is measured by the digital spectrum analyzer.
RQT9861
13