Audio cable 
e.g.,
Connecting the AC mains lead
For the United Kingdom and Ireland
READ THE “Caution for AC mains lead” BEFORE CONNECTION.
AC mains lead (supplied)
To household mains socket
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes a small amount of power (Z“Specifications”) when it is in standby mode. Disconnect the power supply if you do not use the system.
Bluetooth® connection
You can connect and play an audio device wirelessly through Bluetooth®.
Preparation
Switch on the Bluetooth® feature of the device and put the device near the system.
Note:
•A device must be paired to connect.
•You can pair up to 8 devices with this system.
If a 9th device is paired, the device that has not been used for the longest time will be replaced.
Connecting a paired device
Preparation
If this system is connected to a Bluetooth® device, disconnect it (Zsee below).
1Press [
] to enter Bluetooth® mode. “BLUETOOTH READY” is shown.
2Select “SC-HTE80” from the Bluetooth® menu of
the device.
The name of the connected device is shown.
Disconnecting a device
Press and hold [
] until “BLUETOOTH READY” is shown.
Note:
•The system can only connect to one device at a time.
•When “BLUETOOTH” is selected as the source, this system will automatically try to connect to the last connected device.
•The Bluetooth® device will be disconnected when you select another source.
Pairing a device
1 | Press [ ] to select “BLUETOOTH”. |
|
| If “PAIRING” is shown, continue with step 3. |
|
2 | Press and hold [ ] until “PAIRING” is shown. |
|
3 | Select |
|
| the device. |
|
| If prompted for a passkey, input “0000”. |
|
| The device connects with this system automatically |
|
| after pairing is complete. | RQT9861 |
| The name of the connected device is shown. | |
|
|
7