USB
You can connect and play music tracks from your USB device.
Connecting a USB device
Preparation
Before you connect a USB device to the system, make sure you do a backup of the data.
Do not use a USB extension cable. The system cannot recognize USB device connected through a cable.
Playback
1Press [USB] to select “USB B” or “USB A”.
2Press [1/;
] to start playback.
•Stop playback
Press [∫]. “RESUME” is shown. Press [1/;] to continue playback.
OR
Press [∫] two times to stop the playback fully.
For other operations, refer to “Disc”.
Improving the sound quality
In situations where the station's signal is weak, sound quality may be improved by manually selecting Mono reception.
1Press [PLAY MENU] to select “FM MODE”.
2Press [2, 1] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also canceled when you change the frequency.
Memory presetting
30 FM stations can be preset.
ENGLISH
ILLUMINATION
A |
B |
USB status indicator
USB device (not supplied)
Decrease the volume and connect the USB device to the USB port.
Hold the main unit when connecting or disconnecting the USB device.
Note:
USB status indicator lights up when selected.
Viewing available information
You can view the available information on the display panel.
Press [DISPLAY].
Radio
Manual tuning
1Press
2Press [6] or [5] to select the frequency of the required station.
To tune automatically, press and hold the button until the frequency starts changing quickly.
“STEREO” is shown when a stereo broadcast is being received.
Using the main unit
1Press
2Press [TUNE MODE] to select “MANUAL”.
3Press [:/6] or [5/9] to select the frequency of the required station.
Automatic presetting
1Press [OK] to select “LOWEST” or “CURRENT” frequency.
2Press [PLAY MENU] to select “A.PRESET” and then press [OK].
“START?” is shown.
3Press [OK] to start presetting. To cancel, press [∫].
Manual presetting
1Press [6] or [5] to tune in to the station.
2Press [PROGRAM].
3Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations. The new station replaces any station that occupies the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select the preset station.
Using the main unit
VQT5F35
1 | Press [TUNE MODE] to select “PRESET”. | 9 | |
2 | Press [:/6] or [5/9] to select the preset | ||
|
station.
