Panasonic SC-PT954 Batteries, Use, Preparing the remote control, Connection / AC cord connections

step4

Digital transmitter connection

Digital transmitter

Insert fully until you hear a click.

DIGITAL	Do not insert or remove while
TRANSMITTER

the main unit is on.

Main unit

Simple Setup

step5

AC cord connections

Wireless system Main unit

AC IN

AC IN

VIDEO OUT PR

AM ANT

			L			LOOP ANT G
					EXT
		OPTION V.1			LOOP
			R
				FM ANT		LOOP
Y	PB			(75	)
COMPONENT VIDEO OUT		AUX

Preparing the remote control

AC power supply cord		AC power supply cord
(included)	To household	(included)	To household
	AC outlet		AC outlet
	(AC 120 V, 60 Hz)		(AC 120 V, 60 Hz)

Conserving power	[Note]
The main unit and the wireless system consume a small amount of
	The included AC power supply cords are for use with the main unit and
power when they are turned off (main unit: approx. 0.3 W, wireless
	wireless system only. Do not use them with other equipment. Also, do
system: approx. 0.2 W). To save power when they are not to be used for
	not use cords for other equipment with the main unit or wireless system.
a long time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.

step6

Preparing the remote control

connection / AC cord connections /

∫Batteries

Insert so the poles (i and j) match those in the remote control.

Press in and lift up.

R6/LR6, AA

Replace the cover.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

∫Use

Aim at the remote control signal sensor (➜ 15), avoiding obstacles, at a maximum range of 7.0 m (23 ft) directly in front of the unit.

Digital transmitter

RQTX0105

11