Panasonic sc-pt150 manual Menus, Sound abnormal or improper, Picture abnormal or unviewable

7 Menus			Page
The Setup menu cannot be	•	Select “DVD/CD” as the source.	—
accessed.	•	Cancel program and random play.	18
	•	Cancel JPEG’s playback.	—

7Sound abnormal or improper

Sound is distorted.	•	Noise may occur when playing WMA.	—
Effects do not work.	•	Some audio effects do not work or have less effect with some discs.	—
	•	Dolby Pro Logic II does not work if you have changed the play speed.	—
Humming is heard during	•	An AC mains lead or fl uorescent light is near the main unit. Keep	—
play.		other appliances and cables away from the main unit.
No sound.	•	There may be a slight pause in sound when you change the play	—
		speed.

7Picture abnormal or unviewable

The picture on the television is not displayed correctly or disappears.

• The unit and television are using different video systems.	—
Use a multi-system or PAL television.
• The system used on the disc does not match your television.	—
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a	25
PAL television (“NTSC DISC OUT” in “VIDEO” tab).	31
• Ensure that the unit is connected directly to the television, and is
not connected through a video cassette recorder.	—
• Mobile telephone chargers can cause some disturbance.
• If you are using an indoor television antenna, change to an	—
outdoor antenna.	—
• The television antenna wire is too close to the unit. Move it away
from the unit.

Picture size does not fit the	•	Change “TV ASPECT” in the “VIDEO” tab.	24
screen.	•	Use the television to change the aspect.	—
	•	Change the zoom setting. (“ZOOM” in Functions menu.)	22
Menu is not displayed	•	Restore the zoom ratio to “NORMAL”. (“ZOOM” in Functions	22
correctly.		menu.)
Auto zoom function does not	•	Turn off television zoom function.	—
work well.	•	Zoom function may not work well, especially in dark scenes and	—
		may not work depending on the type of disc.

7 Unit displays

The display is dark.	•	Select “BRIGHT” in “FL DIMMER” in the “OTHERS” tab.	25
“NO PLAY”	•	You inserted a disc the unit cannot play; insert one it can.	12
	•	You inserted a blank disc.	—
	•	You inserted a disc that has not been fi nalized.	—
“NO DISC”	•	You have not inserted a disc; insert one.	—
	•	You have not inserted the disc correctly; insert it correctly.	16
“OVER CURRENT ERROR”	•	The USB device is drawing too much power. Switch to DVD/CD	—
		mode, remove the USB and turn the unit off.
“F61”	•	Check and correct the speaker cable connections.	8
		If this does not fi x the problem, consult the dealer.
“F76”	•	There is a power supply problem. Consult the dealer.	—
“DVD U11”	•	Disc may be dirty. Wipe it clean.	27
“ERROR”	•	Incorrect operation performed. Read the instructions and try	—
		again.
“DVD H & &”	•	Trouble may have occurred. The numbers following “H” and “F”	—
“DVD F & & &”		depend on the status of the unit. Turn the unit off and then back
& stands for a number.		on. Alternatively, turn the unit off, disconnect the AC mains lead,
		and then reconnect it.	—
	•	If the service numbers fail to clear, note the service number and
		contact a qualifi ed service person.

REFERENCE ENGLISH

RQTX0029

35

RQT8043