Panasonic sc-pt150 manual Using sound effects continued, Preparation, To output a test signal

OTHER OPERATIONS ENGLISH

Using sound effects (continued)

Adjusting the volume of each speaker: Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

1 While stopped and no on-screen display is shown

To output a test signal.

L:	Front left	C: Center
R:	Front right	RS: Right surround
LS: Left surround

•There is no output from SW (subwoofer) channel.

2To set the volume level normally used for listening.

3To adjust the speaker level for each speaker.

OR

•Adjust the speaker levels to the same level as the front speakers.

C, RS, LS: −6 dB to +6 dB

To stop the test signal

Press [TEST] again.

To adjust speaker level during play

(Effective when playing multi-channel audio or when Dolby Pro Logic II is on.)

1.Press and hold [–CH SELECT] to select the speaker.

L C R RS LS SW SW: Subwoofer

•You can adjust SW only if the disc includes a subwoofer channel.

•“SW” does not appear on the display and is not adjustable when “ŸPLII” is lit.

•“S” appears on the display when “MOVIE”, “MUSIC” is selected with Super Surround (\ page 29).

In this case, you can adjust both surround speaker levels at the same time using [5, ∞]. S: −6 dB to +6 dB

2.Press [5] (increase) or [∞] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: −6 dB to +6 dB

(L, R: Only the balance is adjustable.)

•To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 3].

RQTX0029

30

RQT8043