Panasonic SC-PT464 Selecting the playback source, Getting Started Playing Discs Operations, Other

Selecting the playback source (continued)

Getting Started

Playing Discs

Operations

DVD			RADIO	RADIO, EXT-IN
	DVD	iPod	EXT-IN

iPod

SETUP SETUP

Selecting the source by the remote control

DVD	DVD/CD (B 9)
RADIO	Each time you press the button:
	FM (B 10)
EXT-IN
	AUX§: For audio input through the AUX terminal.
	D-IN§: For audio input through the
	OPTICAL IN terminal. (B right)

§“(TV)” will appear beside “AUX” or “D-IN”, indicating the TV audio setting for VIERA Link “HDAVI Control” (B 20).

iPod (B 22)

iPod

Press [SELECTOR] on the main unit to select source from the main unit. (B 35)

[Note]

Confirm the audio connection to the AUX or OPTICAL IN terminal on the main unit when you select the corresponding sources (B 7). Reduce the volume on the TV to its minimum and then balance the TV volume with the volume setting on the main unit. Refer also to the operating instructions for your TV to balance the sound.

Making settings for digital audio input

Select to suit the type of audio from the OPTICAL IN terminal on the main unit.

1While in “D-IN” mode

Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.

2While the selected mode is displayed Press [3, 4] to make the setting.

MAIN/SAP mode (Only works with Dolby Dual Mono):

MAIN, SAP§, MAIN+SAP§ (stereo audio)

§“SAP” = Secondary Audio Program

Dynamic Range Compression

DRC ON: Adjust for clarity even when the volume is low by compressing the range of the lowest sound level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)

DRC OFF: The full dynamic range of the signal is reproduced.

PCM FIX mode

PCM ON: Select when receiving only PCM signals.

PCM OFF: Select when receiving Dolby Digital and PCM signals. (When receiving true 5.1-channel surround sound, select “PCM OFF”.)

[Note]

≥Audio that is input through the OPTICAL IN terminal is not output from the HDMI terminal.

≥Underlined items in the above paragraphs are factory settings.

Other

Enjoying sound from all speakers and various sound effects

Reference

VOL

+, VOL

While “MANUAL” is Select other surround modes. displayed

Each time you press [2, 1]:

PLII MOVIE§

Suitable for movie software, or softwares recorded in Dolby Surround.

PLII MUSIC§

RQTX0217

12

SURROUNDSOUND

SURROUND SOUND

		OK	OK
SETUP,	SETUP	W.SRD	W.SRD
	-CH SELECT
─CH SELECT

≥The following sound effects may not be available or may have no effect with some sources, or when headphones are used (B 35).

≥You may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off.

Enjoying surround sound effects

SURROUND OUTPUT indicator on the main

SURROUND unit will light up when there is surround sound effect.

Each time you press the button:

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies depending on the source.

MULTI-CH:

You can enjoy sound from the front speakers, as well as the surround speakers even when playing a 2-channel sound or non-surround sound.

MANUAL: (B right)

Adds 5.1-channel effects to stereo sources.

S.SRND

You can enjoy sound from all speakers with stereo sources. (Surround output will be in mono.)

STEREO

Sound will only be output to the front speakers and the subwoofer from any source.

§“ÎPLII” lights in the main unit’s display when there is effect.

Recommended modes to enjoy TV audio or stereo sources from all speakers:

≥PLII MOVIE

≥PLII MUSIC

≥S.SRND