Panasonic SC-PT580, SC-PT980 manual step, Preparing the speakers, PT980 Front and surround speakers

RQTX1115

6

step 1 Preparing the speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.

≥For assembly, use a Phillips-head screwdriver (not included).

Make sure you have all the indicated components before starting assembly, setup, and connection.

≥Keep the screws out of reach of children to prevent swallowing.

≥For optional wall mount, refer to page 22.

[PT980]		[PT580]
2 Front speakers		2 Front speakers
2 Surround speakers		2 Stands (with cable)
4 Stands (with cable)		2 Bases
4 Bases		8 Screws
8 Screws (without washer) A
4 Screws (with washer) B
	A	B
[PT980] Front and surround speakers
1	Back of the base
		Pull the cable
		straight along
		the line and slide
		into the groove.
		Screw A	Tighten	2
			securely.
2		Insert the wire fully.
		i: White
		j: Blue line
		Push!		1
		Press into the groove.
		Screw B
Leave about 80 mm.		Tighten securely.

[PT580] Front speakers

1

	Slide into the groove.
	Tighten securely.	2
2
	Insert the wire fully.
	i: White
	j: Blue line

Position the cable		Push!
			1
between the ridges.		Press into the groove.
Leave about 120 mm.		Tighten securely.
[PT580] Speaker assembly option
Thread the speaker cable through	Attach the speaker.	Insert the wire fully.
the base.
Leave about		i: White
		j: Blue line Push!
120 mm.
		Press into the groove.
		Tighten securely.
You can remove and use the		Slide into the
cable from the stand. To reattach		groove.
the cable, refer to page 22.