Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰2.0 mm, which is capable of supporting over 10 kg.
e.g. [PT980]
String (not included) Thread from the wall to the speaker and tie tightly.
|
| Approx. |
Speaker | Screw eye | 150 mm |
(not included) | Wall | |
(rear) |
|
|
Caution
≥Do not stand on the base. Be cautious when children are near.
≥When carrying the speaker, hold the stand and base parts.
step 2 | Positioning |
|
|
How you set up your speakers can affect the bass and the sound field. Note the following points:
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
[Note]
Keep your speakers at least 10 mm away from the system for proper ventilation.
Setup example (“Surround layout (Recommended)”: Standard surround placement)
Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate.
| Main unit§1 |
| Center speaker§2 |
Front speaker | Front speaker |
(left) | (right) |
Subwoofer§3 | 60° |
| |
| 120° |
Surround | Surround |
speaker (left) | speaker (right) |
§1 Position with at least 5 cm of space on all sides for proper ventilation.
§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.
§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm from the TV.
Depending on the room layout, you may like to use all the speakers at the front (“Front layout (Alternative)”) (B 9, EASY SETUP settings).
Notes on speaker use
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be negatively affected.
≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage:
–When playing distorted sound.
–When the speakers are reverberating due to a record player, a microphone, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the problem. If it persists, move the speakers further away from the TV.
Caution
≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
[PT980] | You can enjoy surround speaker sound |
| wirelessly when you use the optional |
| Panasonic wireless accessory |
| For details, please refer to the operating |
| instructions for the optional Panasonic wireless |
| accessory. |
|
|
step 3 | Connections |
|
|
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are completed.
1 Speaker connections
Pay attention to the type of speaker and the connector colour when you place the speakers.
Main unit (rear)
Connect to the terminals of the same colour.
Use of the speaker cable stickers is convenient when making cable connections.
Speakers (rear)
Insert the wire fully, taking care not to insert beyond the wire insulation.
i: White
j: Blue line
≥Be careful not to cross (short circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
[PT980]
When using the optional wireless system, do not attempt to connect any extra surround speakers to the main unit.
2 Radio antenna connections
Using an indoor antenna
Adhesive tape | FM indoor antenna |
| (included) |
| Affix this end of the antenna |
| where reception is best. |
FM ANT
(75
)
Main unit (rear)
Using an outdoor antenna
Use outdoor antenna if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
|
| FM outdoor antenna | |
|
| (Using a TV antenna | |
75 | ≠ coaxial | (not included)) | |
The antenna should be | |||
cable | |||
installed by a competent | |||
(not included) | |||
technician. | |||
FM ANT |
| ||
(75 ) |
|
| |
Main unit (rear) |
|
| |
Quick Start Guide Getting Started
RQTX1115
7
