Panasonic SC-PT 250 manual Operating the television, Changing the main unit and remote control

Operating other equipment (continued)

Optional USB connection and operation (continued)

Compatible Devices

•Devices which are defined as USB mass storage class:

–USB devices that support bulk only transfer.

–USB devices that support USB 2.0 full speed.

Supported Formats

	File name	File extension
Still pictures	JPG∗1	.jpg .jpeg
Music	MP3	.mp3
	WMA	.wma
Video	MPEG4 ∗2	.asf

∗1 It may not be possible to play all the fi les due to the condition on how they were created.

∗2 For Panasonic D-Snap/DIGA.

Note

•CBI (Control/Bulk/Interrupt) is not supported.

•Digital Cameras that use PTP protocol or which require additional program installation when connected to a PC are not supported.

•A device using NTFS fi le system is not supported.

[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is supported].

•Depending on the sector size, some fi les may not work.

•It will not operate with Janus enabled MTP (Media Transfer Protocol) devices.

•Maximum folder: 256 folders

•Maximum fi le: 4000 fi les

•Maximum fi le name: 12 characters

•Maximum folder name: 12 characters

•Only one memory card will be selected when connecting a multi- port USB card reader. Typically the fi rst memory card inserted.

OTHER OPERATIONS ENGLISH

Operating the television

You can use the remote control to operate a Panasonic television.

Aim the remote control at the television.

To switch the television on or offTo switch the television’s video input modeAdjust the volume

To play audio from your television through your home theater system

Preparation

Connect your equipment referring to “Connect to the various television terminals” (\ page 11).

For Continental Europe

Press [EXT-IN] to select “AV” as the source. Then reduce the volume on the television to its minimum, and control the volume on this main unit.

For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait

Press [EXT-IN] to select “AUX” as the source. Then reduce the volume on the television to its minimum, and control the volume on this main unit.

Note

•The remote control may not work properly with some models.

•You can enjoy 5.1-channel surround sound when you turn on Super Surround (MOVIE, MUSIC) (\ page 29).

Changing the main unit and remote control

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1 While pressing and holding [¡/ ¢] on the main unit

“REMOTE 2” appears on the main unit display.2 To operate in “REMOTE 2” mode

+

(Press and hold for 2 seconds)

RQTX0055

34

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.

•If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

•If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

Note

You can still operate a television using the remote control (\ see above) even after switching the mode.

RQT8043