GETTING STARTED ENGLISH
Speaker assembly
Preparation
•To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
•For assembly, use a
•Make sure you have all the indicated components before starting assembly, setup, and connection.
•There is no difference between the right and left speakers and stands.
•For optional wall mount, refer to page 9.
2 Front speakers | 2 Stands (with cable) | 2 Bases | 8 Screws | |||
(with cover plate) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Attach the stand to the base.
1Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.
Cable
Base
2Attach the stand to the base while gently pulling on the end of the speaker cable.
Stand
3Attach the speaker to the stand.
Pull out the end of the speaker cable and position it between the ridges. Attach the speaker to the stand.
Speaker
3
1Cover plate
Remove before attaching the speaker and keep for wall- mount use (\ page 9).
Ridges
Stand
2
Cable
Base
Cable
Pull gently.
2Secure the stand to the base.
Screw
Tighten securely.
4Secure the speaker to the stand.
Speaker
| Screw | |
| Tighten securely. | |
Stand | Ensure the speaker | |
cable is | ||
| ||
| centered in the groove. |
5Connect the speaker cable.
Insert the wire fully.
Stand
2
+: White
−: Blue
Push!
Base
1 
Slide the speaker cable into the groove.
Screw
Tighten securely.
RQTX0055
8
Press the speaker cable into the groove.
RQT8043
