■Preventing the speakers from falling

Preventing the speakers from falling

You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

Consult a qualifi ed housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

String (not included) Thread from the wall to the speaker and tie tightly.

Approx. 150 mm

Rear of the speaker

Screw eye

 

(not included) Wall

ENGLISH

Speaker installation options

STARTED

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k per screw. Consult a qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

When mounting the front speakers to a wall, we recommend using a string (not included) to prevent it from falling.

2 Screws

2 Cover plates

Preparation for front speakers

1 Remove the speaker cable from the stand.

1Release the cable from the groove.

Speaker installation options■Attaching to a wall 2

2 Connect the cable (\ page 8).

3 Fit the speaker securely onto the screw(s) with the hole(s).

Front speaker

Center speaker

106 mm

 

 

200 mm

340 mm

 

 

Surround speaker

Example:

 

In this position, the

Move the speaker

speaker will likely

so that the screw is

fall if moved to the

in this position.

left or right.

 

Reattaching the speaker cable to the stand

1 Remove the eight screws from the stand, and remove the speaker net.

2 Screws Screw

2 Position the cable.

GETTING

1 Attach the cover plate to the front speaker

2 Preparation for front speakersReattaching the speaker cable to the stand Screw

Tighten securely.

1 Cover

plate

2 Drive a screw (not included) into the wall.

Ø4.0 mm ■Fitting speaker stands (not included)(For center and surround speakers)Example: Center speaker Ø7.5 to 9.5 mm

Wall or pillar

4.0 to 6.0 mm

 

Approx. 15 cm

Press the speaker cable into the groove.

Cable

3 Attach the speaker net with the screws.

Fitting speaker stands (not included)

(For center and surround speakers)

Ensure the stands meet these conditions before purchasing them.

Note the diameter and length of the screws and the distance between screws as shown in the diagram.

The stands must be able to support over 10 kg.

The stands must be stable even if the speakers are in a high position.

Example: Center speaker

Metal screw holes For attaching to speaker stands

5 mm, pitch 0.8 mm Manual backgroundManual backgroundManual backgroundManual backgroundManual background

Plate thickness plus

 

7 mm to 10 mm

60 mm

Speaker stand

(not included)

RQTX0055

9

RQT8043

Page 9
Image 9
Panasonic SC-PT 250 manual Speaker installation options, English, Preventing the speakers from falling, Attaching to a wall