Panasonic SC-VK760 manual Operating a television, Changing the main unit and remote control mode

400

4000

44

44

It may not be possible to play all the fi les due to the condition on how they were created.

For Panasonic D-Snap/DIGA

Video

MPEG4 ∗2

.asf

Music

MP3

WMA

.mp3

.wma

Still pictures

.jpg .jpeg

JPG ∗1

File extension

File name

2 Press [3, USB] to begin playback.

3 Press [TOP MENU] or [MENU] to display the USB menu.

4 Press [5, ∞, 2 , 3] and then [ENTER] to select the desired item.

For other operating functions, they are similar as those described in “DISC OPERATIONS” (\ page 14 to 25).

Compatible Devices

Devices which are defined as USB mass storage class:

– USB devices that support bulk only transfer.

– USB devices that support USB 2.0 full speed.

Supported Formats

unit.

DISPLAY DECK 1/2 RECORD

REW STOP FF

MIC 2

EXT-IN TUNER

TAPE DVD/CD

MUSIC PORT

MIC 1

USB

MIC VOL

(not included) It is not recommended to

use a USB extension cable. The device connected via the cable will not be recognised by this

SUBWOOFER

5

SOUND EQ

4

USB enabled device

SUPER SOUND EQ

3

Connecting to the USB devices

The USB connectivity enables you to connect and play tracks or fi les from USB mass storage class devices. Typically, USB memory devices. (Bulk only transfer)

Preparation

Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up.

It is not recommended to use a USB extension cable. The USB device is not recognised by this unit.

1 Connect the USB mass storage device (not included).

∗1

∗2

Note:

Maximum number of folders

Maximum number of fi les

Maximum length of folder name

Maximum length of fi le name

•CBI (Control/Bulk/Interrupt) is not supported.

•Digital Cameras that use PTP protocol or which require additional program installation when connected to a PC are not supported.

•A device using NTFS fi le system is not supported. [Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is supported].

•Depending on the sector size, some fi les may not work.

•It will not operate with Janus enabled MTP (Media Transfer Protocol) devices.

•Only one memory card will be selected when connecting a multi-port USB card reader. Typically the fi rst memory card inserted.

Operating a television

Point the remote control at the television for the following operations.

To switch the television on or off

To switch the television’s video input mode

Adjust the volume

Changing channels

Note:

Some models cannot be operated by this remote control.

Changing the main unit and remote control mode

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1	While pressing and holding [EXT-IN] on the main
	unit
	Press and hold [2] until “REMOTE 2” appears on
	the main unit display.
2	Press and hold [ENTER] and [2] for at least 2
	seconds.

The main unit and remote control are now set to operate in “REMOTE 2” mode.

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.

If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

Note:

You can still operate a television using the remote control ( see above) even after switching the mode.

OTHER OPERATIONS DANSKENGLISH

FRANÇAIS

LANG - 4

LANG - 5

RQTV0239

33

RQTV0239_1L.indd 33 6/12/07 12:36:48 PM