Panasonic SC-VK860 manual Unit displays, Television displays, Using the cassette deck, Disc trays

Unit displays				Page
Although the unit is on		•	Turn off the demo function.	10
standby mode, the display		•	If you set the clock, demo function will be turned off automatically.	—
lights up and changes
continuously.
The display is dark.		•	Press [DIMMER] to brighten the display.	13
“NO PLAY”		•	You inserted a disc or USB device which the unit cannot play; insert one that	11, 33
			can.
		•	You inserted a blank disc or USB device.	—
		•	You inserted a disc that has not been fi nalized.	—
“NO DISC”, “NO USB”		•	You haven’t inserted a disc or USB device; insert one.	—
		•	You haven’t inserted the disc or USB device correctly; insert it correctly.	14, 33
“OVER CURRENT ERROR”		•	The USB device is drawing too much power. Switch to DVD/CD mode, remove	—
			the USB and turn the unit off.
“F61”		•	Check and correct the speaker cord connections.	6, 7
			If this does not fi x the problem, there is a power supply problem. Consult the
			dealer.
“DVD U11”		•	Disc is dirty. Wipe it clean.	25
“ERROR”		•	Incorrect operation performed. Read the instructions and try again.	—
“DVD H	”	•	Trouble may have occurred. The numbers following “H” and “F” depend on the	—
“DVD F	”		status of the unit. Turn the unit off and back to on. Alternatively, turn the unit off,
stands for a number.			disconnect the AC power supply cord, and then reconnect it.
		•	If the service numbers fail to clear, note the service number and contact a	—
			qualifi ed service person.
“REMOTE 1” or “REMOTE 2”		•	Match the modes on the main unit and remote control. Depending on the	33
			number being displayed ( “1” or “2”), press and hold [ENTER] and the
			corresponding numeric button ([1] or [2]) for at least 2 seconds.

ENGLISH

REFERENCE

DANSK

Television displays

“This disc may not be	• You can only play DVD-Video if their region number is the same or includes the	Cover
played in your region”	same region number as the unit or if the DVD Video is marked “ALL”. Confi rm
	the region number for the unit on the back of the main unit.
No on-screen display.	• Select “On” in “On-Screen Messages” in “Display” tab.	23
“ ”	• The operation is prohibited by the unit or disc.	—
“Cannot display group xx,	• You are trying to display incompatible contents.	—
content xx”
“Check the disc”	• This disc may be dirty.	25
“Authorization Error”	• You are trying to play the DivX VOD content that was purchased with a different	24
	registration code. You cannot play the content on this unit.
“Rented Movie Expired” or	• The DivX VOD content has zero remaining plays. You cannot play it.	24
“Rental Expired”

Using the cassette deck

Poor quality sound.	•	Clean the heads.	34
Recording is not possible.	•	If the erasure prevention tabs have been removed, cover the holes with	27
		adhesive tape.

FRANÇAIS

LANG - 4

Disc trays

Disc tray(s) cannot open.	•	Press [ /I] to release the jammed tray(s) as the unit will switch off. Switch it on	14
“CHGR ERR” is displayed.		again and the tray(s) will initialize to the previous tray(s) condition.	—
	•	If this still does not fi x the problem, please consult the dealer.

LANG - 5

Memory reset (Initialization)

When the following situations occur, refer to the instructions below to reset the memory:

•There is no response when buttons are pressed.

•You want to clear and reset the memory contents.

To reset memory

1Disconnect the AC power supply cord. (Wait at least 3 minutes before proceeding to step 2)

2While pressing and holding down [/I] on the main unit, reconnect the AC power supply cord.

“– – – – – – – – –”appears on the display.

3Release [/I].

All the settings are returned to the factory preset. You will need to reset the memory items.

RQTV0239

37

RQTV0239_1L.indd 37 6/12/07 12:36:55 PM