Signal type/data

LPCM/PPCM/GD/DTS/MP3/MPEG:

Signal type kHz (sampling frequency)/bit/ch (number of channels)

Example: 3/2 .1ch

.1: Low frequency effect

(not shown if there is no signal)

0:No surround

1:Mono surround

2:Stereo surround (left/right)

1:Center

2:Front left + Front right

3:Front left + Front right + Center

It can be a while before playback starts if you change the audio of a Xvid disc.

PLAY SPEED

Change play speed

– from “x0.6” to “x1.4” (in 0.1-unit step)

•Press [4/9] two times to continue normal playback.

•After you change the speed:

−Audio output will switch to 2-channel stereo.

−Sampling frequency of 96 kHz is converted to 48 kHz.

REPEAT MODE

(Z 12, “Repeat playback”)

A-B Repeat: Repeat a specified section

Except (still picture part) (SVCD only)

Press [OK] at the start and end points.

• To cancel, select “OFF”.

SUBTITLE

(with multiple subtitles) (SVCD only)

Select subtitle language

•For +R/+RW disc, a number display will replace the subtitles that cannot be shown.

(with subtitle on or off information)

ON ↔ OFF

ANGLE

(with multiple angles)

Select a video angle

DATE DISPLAY

Show the date of a picture

ON ↔ OFF

ROTATION

Rotate a picture (during pause)

0 ↔ 90 ↔ 180 ↔ 270

█Menu 2 (Video)

PICTURE MODE

NORMAL: Normal images.

CINEMA1: Mellows images and enhances details in dark scenes.

CINEMA2: Sharpens images and enhances details in dark scenes.

DYNAMIC: Enhances the contrast for powerful images.

ANIMATION: Suitable for animation.

ZOOM

Select zoom sizes

NORMAL, AUTO (), x2, x4

(during pause)

TRANSFER MODE

Select the method of conversion for video output accordingly

When playing PAL discs

AUTO: Converts the film and video automatically.

VIDEO: Select when the content is distorted in the “AUTO” mode.

FILM: Select when the edges of the film content are jagged or rough in the “AUTO”

mode.

But, if the video content is distorted (as illustrated on the right), then select “AUTO”.

When playing NTSC discs

AUTO1: Converts the film and video automatically.

AUTO2: Select to automatically sense the differences in the frame rates of the film content and converts it accordingly.

VIDEO: Select when the video content is distorted in the “AUTO1” or “AUTO2” mode.

SOURCE SELECT

AUTO: Converts the Xvid content automatically.

INTERLACE: Select if the Xvid content was encoded in interlace format.

PROGRESSIVE: Select if the Xvid content was encoded

in progressive format.

█Menu 3 (Audio)

DIALOGUE ENHANCER

Make the dialogue in films easier to hear

(Dolby Digital, DTS, 3-channel or higher, with the dialogue recorded in the center channel)

(Dolby Digital, 3-channel or higher, with the dialogue recorded in the center channel)

ON ↔ OFF

RQT9951

15