“AUDIO” menu
DOLBY DIGITAL
BITSTREAM
PCM
DTS
BITSTREAM
PCM
For the Middle East and South Africa
MPEG
BITSTREAM
PCM
Select “BITSTREAM” when the equipment can decode the bitstream (digital form of
DYNAMIC RANGE
ON: Adjust for clarity even when the volume is low. The range between the lowest and the highest sound levels is compressed. Convenient for late night viewing. (Only works with Dolby Digital.)
OFF
“DISPLAY” menu
LANGUAGE
Select the language for the on-screen messages.
ENGLISH FRANÇAIS ESPAÑOL PУCCKИЙ
“HDMI” menu
VIDEO PRIORITY
ON: When using the HDMI AV OUT terminal for video output. The resolution of the video output from the HDMI AV OUT terminal is optimised according to the capability of the connected equipment (e.g. TV).
OFF: When not using the HDMI AV OUT terminal for video output.
AUDIO OUT
ON: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the connected equipment, audio output may differ from the audio settings of this system.)
OFF: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of this system.)
RGB RANGE
STANDARD
ENHANCED: When the black and white images are not distinct.
“OTHERS” menu
SLIDE SHOW TIME
To change the slideshow time. 1 SEC to 15 SEC (in 1-unit)
15 SEC to 60 SEC (in 5-unit)
60 SEC to 180 SEC (in 30-unit)
“3 SEC” is the factory preset.
EASY SETUP
SET: Shows the EASY SETUP settings.
DVD-VR/DATA
Select to play only
SCREEN DIMMER
This is to prevent burnt mark on the TV screen.
OFF
WAIT 5 MIN: If there is no operation for 5 minutes, the picture becomes grey. The TV screen will go back to the normal position when you do some operations. (This does not apply during video playback.)
DEFAULTS
This returns all values in the SETUP menus to the default settings.
RESET
The password screen is shown if “RATINGS”
(Z 23, “RATINGS”) is set. Input the same password and then press [OK], then switch off the system and switch on again.
RQT9951
24