4 Connect the TV to this system.Connect either HDMI cable or video cable to this system.HDMI terminalHDMI cable

TV

HD MI IN (not supplied)This connection provides the best picture quality.•Set “VIDEO PRIORITY” to “ON” (Z 24, “HDMI” menu).•Set “VIDEO FORMAT” in Menu 4 (HDMI) (Z 16).

Note:

•Use the supplied HDMI cables.

•If you use an optional HDMI cable, use High Speed HDMI Cables. Non-HDMI compliant cables cannot be utilised.

•It is recommended that you use Panasonic HDMI cable. When outputting 1080p signal, use HDMI cables 5.0 m or less.

•For TV with more than one HDMI terminal, refer to the TV’s operating instructions for the connection.

VIDEO OUT terminal Video cable

TV

(not supplied)

Note:

Do not make the video connections through the VCR. The video cannot show correctly because of copy-guard protection.

Alternative connection to a TV

To listen to the TV audio on this system, connect the audio cable to this system.

AUX 1 terminal

TV

(not supplied)

Audio cable (not supplied)5 Connect the AC mains lead.

(For the AC mains plug of three pins)

READ THE “Note on AC mains lead” BEFORE CONNECTION.To household mains socketDo not use an AC mains lead from other equipment.Conserving power

The system consumes a small amount of power even when it is in standby mode. Disconnect the power supply if you do not use the system.

Some settings will be lost after you disconnect the system. You have to set them again.

RQT9951

7