Panasonic SC-ZT2 Enjoying movies and music, buttons, equipment, To adjust the volume, Play

Press

Select the source.

2

Press

Turn on the system.

„ After playback, reduce the volume level and turn off.

Operation on the main unit

1

Adjustment range: 0 (Min) to 50 (Max)

To adjust the volume press these buttons.

You can enjoy a variety of surround effects. (➜ page 17)

3 Start play on the connected equipment.

„

4

„ “AUX 1”, “AUX 2”, and “AUX 3” switch every time you press [AUX].

INPUT SELECTOR

Enjoying movies and music

Enjoying movies and music

Preparations • Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV remote control.

• Make sure that the speakers are on. (The following are operations when the power is on in Wireless Link Standby.)

Aim the remote control toward the
signal sensor (➜ page 7) on the	1
main unit of this system.			Press this button to turn on the system.
	2		To select the source press one of these
		or	buttons.
			TV	: TV (optical,analog)
			BD/DVD	: Blu-ray Disc player/DVD recorder (HDMI)
			AUX 1	: AUX1 terminal (HDMI)
		or	AUX 2	: AUX2 terminal (optical)
			AUX 3	: AUX3 terminal (analog)

Play	(The input source switches each time you
	press the button.)
	TV	: TV (optical, analog)
	BD/DVD	: Blu-ray Disc player/DVD recorder (HDMI)
	AUX 1	: AUX1 terminal (HDMI)
	AUX 2	: AUX2 terminal (optical)
	AUX 3	: AUX3 terminal (analog)

3	Start play on the connected
	equipment.
4	To adjust the volume.

	Turn
	Note
	• See page 27 for digital signals that can be played on this system.
	• Depending on the playback signal, you may feel the volume of the bass or surround speakers is not balanced with
	the volume of the front speakers. In this case, you can adjust the speaker volume during playback. (➜ page 20)
	• Even if you switch input to “TV ”, images (or audio) of the equipment connected to the BD/DVD IN terminal or AUX1
	terminal are output from the TV OUT terminal. When the equipment is connected to both the BD/DVD IN terminal and
	AUX1 terminal, signals of equipment whose input is lastly selected are output.
	• When using a DVD recorder with built-in VCR (with the DVD output terminal and DVD/VHS output terminal
	mounted), select the input as follows in step 2 above.
	To enjoy DVD (when connected to AUX2): select “AUX 2 ”.
16
	To enjoy video (when connected to AUX3): select “AUX 3 ”.

VQT2R70