Panasonic SC-PT753, SCPT750 manual Batteries, Use, Preparing the remote control / Performing Quick

step6 Preparing the remote control

∫Batteries

Insert so the poles (i and j) match those in the remote control.

Press in and lift up.

R6/LR6, AA

Replace the cover.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

∫Use

Aim at the remote control signal sensor (➜ page 11), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.

Simple Setup

SETUP

step7 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions. ≥This remote control can perform some basic television operations (➜ page 10).

	1		Turn on the unit.
DVD	2	DVD	Select “DVD/CD”.
	3		Show the QUICK SETUP
		SETUP	screen.
			Setup
	, , ,		QUICK SETUP
			Select the menu language.
	ENTER		English
	RETURN
			to select and press ENTER	RETURN to return
SETUP	4	Select	Follow the messages
		RETURN	and make the settings.
			≥Menu Language
			≥TV Type
		Register	≥TV Aspect
	5		Press to finish QUICK
		ENTER	SETUP.
	6	SETUP	Press to exit.

To change these settings later

Select “QUICK SETUP” in the “Others” menu (➜ page 25).

Preparing the remote control / Performing QUICK

RQTX0044

9