Panasonic SCPT750, SC-PT753 Using the EZ SyncTM Hdavi ControlTM, One touch play Speaker control

Using the EZ SyncTM “HDAVI ControlTM”

	SKIP	SLOW/SEARCH
		PLAY
		ONE TOUCH PLAY
ControlTM”
“HDAVI	EZ Sync “HDAVI Control”
SyncTM	EZ Sync “HDAVI Control” is a convenient function that offers linked
	operations of this unit, and a Panasonic television (VIERA) under “HDAVI
	Control”. You can use this function by connecting the equipment with the
EZ	HDMI cable. See the operating instructions for connected equipment for
	operational details.
the	This unit supports “HDAVI Control 2” function.
Using	The TV with “HDAVI Control 2” function enables the following operation:
	EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (➜ right)

Preparation

≥Confirm that the HDMI connection (➜ page 6) has been made.

≥Set “EZ Sync” to “On” (➜ page 24, “HDMI” menu).

≥To complete and activate the connection correctly, turn on all EZ Sync “HDAVI Control” compatible equipment and set the television to the corresponding HDMI input mode for the home theater system.

Whenever the connection or settings are changed, reconfirm the points above.

One touch play

Speaker control

You can select whether audio is output from the home theater system or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television.

Home theater

Theater speakers are active.

≥When the home theater system is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn the home theater system on and select “AUX” as the source.

≥The television speakers are automatically muted.

≥You can control the volume setting using the volume or mute button on the TV’s remote control. (The volume level is displayed on the main unit’s FL display.)

≥To cancel muting, you can also use the home theater remote control (➜ page 10).

≥If you turn off the home theater system, television speakers will be automatically activated.

TV

Television speakers are active.

≥The volume of the home theater system is set to “0”.

–This function works only when “DVD/CD” or “AUX” is selected as the source on the home theater system.

≥Audio output is 2-channel audio.

≥When switching between the theater and television speakers, the TV screen may be blank for several seconds.

Power off link

When the television is turned off, the home theater system goes into standby mode automatically.

≥This function works only when “DVD/CD” or “AUX” is selected as the source on the home theater system.

≥When the television is turned on, the home theater system does not turn on automatically. (Power on link is not available.)

[Note]

Only the home theater system turns off when you press [Í] for shutting it down. Other connected equipment compatible with EZ Sync “HDAVI Control” stays on.

EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”)

You can control the disc menus of the home theater system with the TV’s remote control when using the “DVD/CD” source. When operating the TV’s remote control, refer to the below illustration for operation buttons.

You can turn on the home theater system and television, and start playing the disc in the play position with a single press of a button.

Press [ONE TOUCH PLAY].

Theater speakers will be automatically activated (➜ right).

≥This function also works if you press [1 PLAY] on the home theater remote control during home theater standby mode.

[Note]

Playback may not be immediately displayed on the television. If you miss the beginning portion of playback, press [:] or [6] to go back to where playback started.

Auto input switching

≥When you switch the television input to:

– TV tuner mode, the home theater system will automatically switch to “AUX”.

– HDMI input mode for the home theater system, the home theater

1Select the theater operation menu by using the television menu settings.

(For details, refer to the operating instructions of your television.)

≥The home theater system will automatically switch to “DVD/CD” if it is in “AUX” mode.

2Select the desired item.

≥“TOP MENU”: Shows a disc top menu

(➜ page 15, 18) or program list (➜ page 19).

≥“MENU”: Shows a disc menu (➜ page 15, 18) or play list (➜ page 19).

≥“Control Panel”: The basic operations for discs are available.

ENTER/

PLAY

RETURN

EZ Sync

TOP MENU

MENU

Control Panel

PAUSE

PLAY

SKIP SKIP

RETURN STOP

system will automatically switch to “DVD/CD” if it is in “AUX” mode.

RQTX0044	≥When you start disc play, the television will automatically switch to the
	HDMI input mode for the home theater system.

26

[Note]

≥Depending on the menu, some button operations cannot be performed from the TV’s remote control.

≥“Control Panel” can be selected directly by using a button on the TV’s remote control (e.g. [SUB MENU]).