Copying to discs

≥You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.)

≥Motion pictures and still pictures cannot both be copied to a single disc.

≥Scenes recorded in normal recording mode and scenes recorded in long recording mode cannot be copied to the same disc.

≥Refer to page 80 for Approximate time for copying to a disc.

1 Connect this unit to the DVD burner to prepare for copying. (l 77)

2 Follow the screen display, use the joystick to select the desired item then press the centre of the joystick.

≥Select and press the centre of the joystick to return to the previous step.

≥(When [SELECT SCENES] is selected) Press the centre of the joystick to select

the scene, which will then be displayed. Press the centre of the joystick again to deselect.

≥(When [SELECT DATE] is selected) Press the centre of the joystick to select the date, which will be outlined in red.

Press the centre of the joystick again to deselect.

≥Up to 99 scenes/99 dates can be selected in succession.

3 Select [START], then press the centre of the joystick.

≥When 2 or more discs are necessary for copying, follow the on-screen instructions to switch discs.

≥You may need more discs than displayed number of discs when you are copying additionally to a used DVD-RAM.

≥Eject the disc after copying is completed.

≥When the copied disc is played back on another device and the list of scenes is displayed, they are ordered by date.

∫When copying motion pictures recorded in long recording mode

The scenes recorded in long recording mode are copied after being converted to normal recording mode. When copying, the number of discs required for copying may also increase, because the recording volume may increase, even for the same recording time, due to the data volume increase caused by the conversion.

Before you delete the data on the media after copying is complete, be sure to play back the discs to check that they have been copied to correctly. (l 81)

79

VQT2N91