∫To disconnect USB cable safely1Double click the icon in task tray displayed on the PC.≥Depending on your PC’s settings, this icon may not be displayed.2Select [USB Mass Storage Device] and click [Stop].3SDR-S50Verify [MATSHITA SDR-S50/SD USB Device] is selected and click [OK].

SDR-S45

Verify [MATSHITA SDR-S45/SD USB Device] is selected and click [OK].

SDR-T55

Verify [MATSHITA SDR-T55/SD USB Device] or [MATSHITA SDR-T55/MEM
USB Device] is selected and click [OK].

SDR-T50

Verify [MATSHITA SDR-T50/SD USB Device] or [MATSHITA SDR-T50/MEM USB Device] is selected and click [OK].

SDR-H95

Verify [MATSHITA SDR-H95/SD USB Device] or [MATSHITA SDR-H95/HDD USB Device] is selected and click [OK].

SDR-H85

Verify [MATSHITA SDR-H85/SD USB Device] or [MATSHITA SDR-H85/HDD USB Device] is selected and click [OK].

Charging the battery using USB bus power

When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge.

≥When connecting this unit to a PC for the first time, make sure to connect this unit to the PC with the power of this unit turned on.

≥Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the way.

≥Do not use any other USB cables except the supplied one.*

≥Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.

≥During charging, the status indicator flashes. When charging is finished, the status indicator turns off.

≥Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (l 14)

≥Charging will take 2-3 times longer than charging with the AC adaptor.

≥Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).

≥If the status indicator flashes at a particularly fast or slow rate, refer to page 110.

* A USB cable is not supplied with the SDR-S45.

93

VQT2N91