6
Accessories
Assembly screws
(4 of each)
A
XSS5+15FNK
M5 x 15
B
XYN4+F12FJK
M4 × 12
Bracket (1)
Base (1)
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will
fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation
is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the LCD panel
to your desired angle.
b
15°
15°
a
(View from above)
a: 17.8 ” (450 mm)
b: 12.2 ” (309 mm)
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
Attaching the pedestal to TV
■Assembling the pedestal
■Set-up
Fix securely with assembly
screws
A
. (Total 4 screws)
Tighten screws firmly.
Fix securely with assembly
screws . (Total 4 screws)
Tighten screws firmly.
A
Bracket
Front
Base
B
B
Foam mat or thick
soft cloth