Panasonic TC-60PS34 owner manual Network cameras list, Software update

Network cameras list

Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras.

Press “Network cameras list” and				Start camera search.
display screen
				●Before you start to search for a camera, switch the
Set Network camera setting				camera to registration mode.
Network cameras list			select	●Search condition also depends on “Network settings”
		Connected		Delete camera information.
Camera 1	BL-C210A		Default
Camera name	Model	Status
...	...	...
...	...	...		Disconnect to camera.
...	...	...
...	...	...		“Disconnected” will be displayed in “Status”.
...	...	...
...	...	...		Set to default use.
...	...	...
Select	OK			Displayed “(Default)” next to camera name.
	RETURN

Find cameras	Delete	(Available only when reconnecting)
Disconnect	Default camera
●For this operation, please refer to the operating		Connect to Camera. “Connect” will be displayed in
manual for the Network camera.		“Status”.

Software update

Using

Select “Software update”

Menu	Network settings
	Connection test
	Network connection	Wireless (WiFi)
	Wireless network
	IP address/DNS settings
	Network cameras list
	Software update
	Mac address	00-0b-97-7c-65-e9

Press OK to start the Software update screen select Follow directions on the screen

●Set “Clock” first. (p. 15)

OK

Network services

Advanced

37