Panasonic TC-65PST34 Wireless network Wireless network setting, IP address/DNS settings

Wireless network (Wireless network setting)

■Sets / Changes wireless network setting

Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting

Wireless network	select
Please choose connection method:	OK
Search for wireless networks

WPS (Wi-Fi Protected Setup using push button)

WPS (Wi-Fi Protected Setup using PIN number)

Manual settings

* Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification

●For more details on setting of an Access point, please refer to operating manual for the Access point.

Search for Wireless networks:

Select an access point from the ones searched for automatically, and configure the settings as instructed on the screen.

WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons.

WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point.

Manual settings:

Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect.

●When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN.

IP address/DNS settings

Select “IP/DNS setting mode” and set to “Automatic”

(When IP/DNS automatic acquisition in DHCP can be used)

Menu	IP address/DNS settings		select
	IP setting mode	Automatic
	IP address	192.168.0.5
	Subnet mask	255.255.255.0	OK
	Default gateway	192.168.0.254
	DNS setting mode	Automatic
	DNS	192.168.0.20

The acquired address is displayed.

■Manual setting

Select “IP/DNS setting mode” and set to “Manual”

Select the item and press OK

Check the specifications of the broadband router and enter each IP address.

Or Enter each IP address as was specified by the provider

IP address 0 . 0 . 0 . 0

Each IP address is acquired automatically

If you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances. If you are not sure, check with the person who installed the equipment, or check the instructions for each device.

Proxy setting

Set only if specified by the provider. It is not required for normal household use.

Select “Proxy setting”

Menu	IP address/DNS settings		select
	IP setting mode	Automatic
	IP address	192.168.0.5
	Subnet mask	255.255.255.0	OK
	Default gateway	192.168.0.254
	DNS setting mode	Automatic
	DNS	192.168.0.20
	Proxy setting

Select item and press OK

Menu	Proxy setting		select
	Proxy address
	Proxy port	0	OK

Enter address or port number and press OK

●Entering characters (p. 21)

■Proxy address

This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser. Setting is only required if specified by the provider.

■Proxy port

This number is specified by the provider together with the Proxy address.

40