AutoDome Easy II IP | Preparing the Wiring en 65 |
|
|
8.2.1Power Connections to Indoor Cameras
WARNING!
The indoor IP camera models can accept power from the
24 VAC power input or from the Ethernet input. Ensure that the camera receives power from only one source.
Refer to Section 8.3 Ethernet Connection (IP models), page 67, for more information about connecting Power over Ethernet.
Figure 8.1 Power Cable
| Ref. # | Wire | Color |
| 1 | 24 VAC | Red |
| 2 | 24 VAC | Black |
| 3 | User supplied Power Supply | n/a |
|
|
|
|
NOTICE!
The camera unit accepts 24 VAC 1.2 A power only. Do not connect 120 V or 230 V to this camera.
To connect the power to indoor models:
1.Locate the cable assembly with a three (3) pin mating connector on one end and the red and black flying leads on the other end.
2.Connect one lead of the 24 VAC power source to the black wire.
3.Connect the other lead of the 24 VAC power source to the red wire.
4.Connect the green earth ground cable to a suitable grounded conduit.
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |
