AutoDome Easy II IP | |
|
|
13.8Alarm I/O Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an existing rule. The default setting is Empty.
Menu items marked with the ‡ symbol are available only with VG4 Pressure Domes.
NOTICE! You can program a total of twelve rules. You must define the inputs and outputs before you program a rule. See Section 1.7 Alarm I/O Setup, Page 192, to configure alarm inputs and outputs.
Alarm I/O Rule Setup... |
| Rule 1 |
| |
|
|
|
|
|
Exit... |
|
| Exit... |
|
1. Rule 1 | Enabled |
| Enabled | No |
2. Rule 2 | Disabled |
| Input: |
|
3. Rule 3 | Invalid |
| Physical Input 1 |
|
4. Rule 4 | Empty |
| NONE |
|
5. Rule 5 | Empty |
| NONE |
|
6. Rule 6 | Empty |
| NONE |
|
7. Rule 7 | Empty |
| Output: |
|
8. Rule 8 | Empty |
| Physical Output 1 | Follows |
9. Rule 9 | Empty |
| OSD |
|
| Empty |
| Aux On 78 | Latched |
| Empty |
| NONE |
|
| Empty |
|
|
|
Focus / Iris: Select |
| Focus / Iris: Select Type | ||
|
|
|
|
|
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |