AutoDome Easy II IP | Getting Started en 73 |
|
|
10 Getting Started
Once the installation is complete, the AutoDome Easy II can be programmed. A typical system includes a keyboard, matrix switcher, monitor, and appropriate wiring connections. Please refer to the individual product manuals for complete installation and setup instructions for each of the system components.
10.1Powering On
When you turn the AutoDome Easy II power on there is a ten
(10)second pause before the dome starts its homing phase. During the homing phase the camera pans left and right and tilts up and down. It also adjusts the lens focus. The entire homing phase lasts approximately 20 seconds and ends with a splash screen.
WARNING!
Before powering the dome on, remove the clear protective plastic sheet on top of the bubble.
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |