76 en | Using the AutoDome Easy II IP AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
11.2 System Requirements
The AutoDome Easy II IP requires specific software and
hardware to allow a user to view live images and to configure
camera settings over a TCP/IP network. These requirements
are:
– A computer with the Microsoft Windows XP or Vista
operating system, network access, and the Microsoft
Internet Explorer Web browser version 7.0 or later, or
– A computer with the Microsoft Windows XP or Vista
operating system, network access, and reception software
such as the Bosch VIDOS software or the Bosch Divar XF,
or
– A compatible hardware decoder from Bosch Security
Systems as a receiver and a connected video monitor.
If you choose to use a computer running Microsoft Internet
Explorer or any of the Bosch software, the computer must
conform to the following minimum requirements:
– Processor: 1.8 GHz Pentium IV
– RAM: 256 MB
– Video system: 128 MB video memory, 1024x768 display
with a minimum of 16-bit color
– Network interface: 100-BaseT
– Microsoft Internet Explorer, version 7.0 or higher
– You must install the following software (available on the
Bosch Security Systems, Inc. Web site at
www.boschsecurity.com)
– DirectX 9.0c
– Java Virtual Machine
– MPEG ActiveX utility
–.Net 2.0
– VideoSDK
NOTICE!
Ensure the graphics card is set to 16-bit or 32-bit color. If you
need further assistance, contact your PC system administrator.