56 en Installing a Pipe Mount | AutoDome Easy II IP |
|
|
6.Outdoor Installation: Ensure that the gasket is attached to the retaining ring. If the gasket and the retaining ring are separate:
a.Locate the flat side of the gasket and the recessed side of the retaining ring.
b.Thread the flat side of the gasket (item 1, below) onto the recessed side of the retaining ring (item 2). The illustration below shows a
CAUTION!
You must ensure that the gasket is attached to the retaining ring as shown above to ensure an environmentally tight seal.
7.Fit the dome cap to the bottom of the pipe.
Outdoor Installation: Apply the following
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |