Brother HL-4070CDW 1, 2, 3, 4, 5, 6, 1, 2

Setting Up the Machine

STEP 1

3 Installing the toner

cartridges

1Unpack the toner cartridges and rock each

toner cartridge 5 to 6 times.

2Remove the protective cover.

3Hold the handle of the toner cartridge and slide

it into the drum unit. Make sure that you match

the toner cartridge color to the same color label

on the drum unit, and make sure that you fold

down the toner cartridge handle (1) once the

tonenr cartridge is in place.

1C — Cyan

2M — Magenta

3Y — Yellow

4K — Black

4Repeat steps 1 through 3 for the remaining

toner cartridges.

5Put the drum unit into the printer.

6Close the front cover of the printer.

4 Load paper in the paper tray

1Pull the paper tray completely out of the printer.

2While pressing the green paper-guide release

lever (1), slide the paper guides to fit the paper

size. Make sure that the guides are firmly in the

slots.

Contents

Main Quick Setup Guide HL-4070CDW Symbols used in this guide Table of Contents To Use the Printer Safely Warning Page Regulations Page Page What is in the box? Control panel Supplied CD-ROM Windows Macintosh 1 Put the CD-ROM into the CD-ROM drive For Windows users 1 2 3 For Macintosh users 1 2 3 2 Remove the packing materials from the printer 1 2 3 4 3 Installing the toner cartridges 1 2 3 4 5 1 2 Page 4 5 6 6 Setting your language on the control panel 1 Installing the Printer Driver For USB interface cable users 1 2 3 4 5 6 For parallel interface cable users 1 2 3 4 Page For wired network interface cable users For Peer-to-Peer network printer users 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 For wireless network users Windows Network For instru ctions, see Wireless Confirm your network environment The setup process will be different depending on your network environment. Windwos Using the SecureEasySetup software to configure your printer for a wireless network 1 2 3 4 5 7 8 9 1 Ready 11 12 13 14 15 1 2 3 4 5 1 30 2 3 4 5 6 8 9 10 1 2 3 11 12 13 14 15 16 17 18 19 20 21 1 2 3 4 5 8 9 10 For network interface cable users 1 2 3 4 5 8 9 10 For wireless network users Macintosh Network For instructi ons, see Wireless Confirm your network environment The setup process will be different depending on your network environment. Using the SecureEasySetup software to configure your printer for a wireless network 1 2 3 4 5 9 1 Ready 2 3 12 13 14 15 16 1 2 3 4 5 1 45 2 3 4 5 6 8 9 10 1 2 11 12 13 14 15 16 17 18 19 Installing the Printer Driver 20 21 22 23 1 2 Setting your IP address, Subnet Mask and Gateway using BRAdmin Light 1 2 3 4 BRAdmin Light utility (For Mac OS 1 2 3 4 5 1 Network default settings 2 Factory Reset 3 1 2 Print Settings 3 Consumables and Options Options Consumables Other Information Shipment of the printer Caution