Brother HL-4070CDW setup guide Getting Started, What is in the box?

Getting Started

1What is in the box?

Carton components may vary from one country to another.

Save all packing materials and the printer carton in case for any reason you must ship your printer.

18 7

2

3

4

6

5

9

1Front cover release button

2Control panel 1

3USB direct interface

4Front cover

1You can adjust the angle of the LCD display by tilting it up or down.

5Paper tray

6Power switch

7Face-down output tray

8Face-down output tray support flap (Support flap)

9Multi -purpose tray (MP tray)

CD-ROM

(including User’s

Guide)

Quick Setup Guide

AC power cord

Belt Unit

(pre-installed)

Waste Toner Box

(pre-installed)

Toner cartridges (Black, Cyan, Magenta and Yellow)

Drum Unit

(pre-installed)

The interface cable is not a standard accessory. Buy the appropriate cable for the interface you are going to use.

„USB cable

Do not use a USB interface cable that is longer than 6 feet (2.0 meters).

Do not connect the USB cable to a non-powered hub or a Macintosh® keyboard. Make sure that you connect it to the USB connector of your computer.

„Parallel cable

Do not use a parallel interface cable that is longer than 6 feet (2.0 meters). Use a shielded interface cable that is IEEE 1284-compliant.

„Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

7