For Network Users

3Web Based Management (web browser)

The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).

Note

The User Name is ‘admin’ and the default password is ‘access’. You can use a web browser to change this password.

We recommend Microsoft Internet Explorer 6.0® (or higher) or Firefox® 1.0 (or higher) for Windows® and Safari™ 1.0 for Macintosh®. Please also make sure that JavaScript and Cookie are always enabled in whichever browser you use. We recommend you upgrade to Safari™ 1.2 or higher to enable JavaScript. To use a web browser, you must have assigned an IP address to the print server.

1 Type http://printer_ip_address/ into your browser.

(Where printer_ip_address is the IP address or the print server name)

„For example: http://192.168.1.2/

(if the printer’s IP address is 192.168.1.2.)

See Chapter 2 of the Network User's Guide.

4Network default settings

To restore all network settings of the internal print server to default, follow the steps below.

1 Press the + or button to choose LAN. Press OK.

Select ab or OK

LAN

2 Press the + or button to choose

Factory Reset.

Press OK.

LAN

Factory Reset

3 Press OK again.

Factory Reset

OK?

5Print the Printer Settings Page

The Printer Settings Page lists all the current printer settings, including network settings. To print the printer settings page:

1 Press the + or button to choose

Machine Info..

Press OK.

Select ab or OK

Machine Info.

2 Press OK again.

Machine Info.

Print Settings

3 Press OK again to print the Printer Settings Page.

52

Page 54
Image 54
Brother HL-4070CDW setup guide Network default settings, Print the Printer Settings