Installing the Printer Driver

Macintosh®

Using the SecureEasySetup™ software to configure your printer for a wireless network

The SecureEasySetup™ software of Broadcom Corporation is an easy way to configure your Brother device to your wireless network settings. By pushing a button on the wireless router or access point, you can complete setup and secure the wireless network. Your router or access point must also support SecureEasySetup™. See the user’s guide for your wireless LAN router or access point for instructions to configure your printer for a wireless network.

Note

Routers or access points that support SecureEasySetup™ have the SecureEasySetup™ symbol as shown below.

4

5

Click Wireless Network users.

Choose Wireless Setup and Driver Install, and then click Next.

1

2

3

Place the Brother printer close to your wireless router/access point. (Less than 5 m/16 feet.).

Make sure that the printer power switch is on.

6 Choose I’d like to use the

 

 

 

 

 

 

SecureEasySetup™ function of my access

Click Install Printer Driver.

point to configure my wireless device. and

click Next.

Note

7 Ensure the on-screen message and click Next.

Choose the Install Printer Driver icon for your region.

Network

Wireless

Macintosh®

8 Refer to the instruction manual that came with your access point to set the SecureEasySetup™ mode of your access point.

41

Page 43
Image 43
Brother HL-4070CDW setup guide Choose I’d like to use, SecureEasySetup function of my access