AutoDome Easy II IP | Configuring the AutoDome Easy II IP en 87 |
|
|
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering new values or by selecting a predefined value from a list field.
After each change, click Set to save the change.
CAUTION!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields are ignored.
12.1Basic Mode: Device Access
Camera name
You can give the AutoDome Easy II IP a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.
The device name is used for the remote identification of a unit, in the event of an alarm for example. For this reason, enter a name that makes it as easy as possible to quickly identify the location.
CAUTION!
Do not use any special characters, for example &, in the name. Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.
Password
An AutoDome Easy II IP is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access.
The AutoDome Easy II IP operates with three authorization levels: service, user and live.
The highest authorization level is service. After entering the correct password, you can access all the functions of the AutoDome Easy II IP and change all configuration settings.
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |
