74 en Using the AutoDome Easy II IP | AutoDome Easy II IP |
|
|
11 Using the AutoDome Easy II IP
The AutoDome Easy II IP transmits PTZ control commands and images over a TCP/IP network. It also allows users to configure the camera display settings, camera operating settings, and to configure the network parameters.
The IP unit incorporates a network video server in the IP module. The primary function of the server is to encode video and control data for transmission over a TCP/IP network. With its H.264 encoding, it is ideally suited for IP communication and for remote access to digital video recorders and multiplexers. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers.
Refer to Section 18 BVIP Firmware Updates, page 132, for firmware upgrade instructions.
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |
