90 en Configuring the AutoDome Easy II IP | AutoDome Easy II IP |
|
|
that, once an IP address is assigned, it is retained each time the system is rebooted.
IP address
Enter the desired IP address for the AutoDome Easy II IP in this field. The IP address must be valid for the network.
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
12.4Basic Mode: Encoder Profile
Default profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for example network structure, bandwidth, data load).
–High resolution 1
High quality, connections with the highest bandwidth, resolution 704 × 576/480 pixels
–High resolution 2
High quality, connections with high bandwidth, resolution 704 × 576/480 pixels
–Low bandwidth
High resolution, connections with low bandwidth, resolution 704 × 576/480 pixels
–DSL
DSL connections with 500 kbps, resolution 352 × 288/240 pixels
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |